| Hybrid Stepping motor Nema 23 |
Bipolar 2.0Nm 4.2A, Unipolar 1.4Nm 3.0A |
|
| Hybrid Stepping motor Nema 34 |
Bipolar 4.2Nm 4.2A, Unipolar 3Nm 3.0A |
|
| Hybrid Stepping motorNema s42 |
Bipolar 20Nm 3.0A, Unipolar 14Nm 4.2A |
|
Micro stepping Driver
Model 5024 |
20-50VDC, 0.54-4.2A, Microstep: 2-128 Size 118*75.5*33 Weight 0.28kg (9.88 oz) |
|
| Micro stepping Driver 250V |
80-250VAC, 0.42-7.8A, 176x145x61mm, 1.16kg |
|
Drive 3 or 4 axis
Micro stepping drive |
- 3 or 4 Axis Unipolar control.
- Individual OR simultaneous control of 2/4 Phase Stepper Motors.
- Accepts 5, 6, or 8 wire stepper motors only. 4 wire types are not usable.
- 42VDC maximum input voltage, 12VDC minimum input voltage. 24VDC Minimum Recommended Voltage.
- 3.0 Amps Maximum per Phase, 500ma (.5A) minimum. Each axis adjustable throughout this range.
- 1/1, 1/2, 1/4, 1/8, and 1/16 Microstepping.
- Step and Direction Control.
- Idle Current Reduction to 50% when idle for 10 seconds. Can change this time delay.
- Built In Protection Circuit to help against blown chips on stepper motor short or open connections.
- 3.7" by 6.8" double sided with top silkscreen and thru plated holes and lead free solder PCB. (RoHS compliant).
- Power On Reset.
- On board voltage regulation for 5-volt logic with 24VDC cooling fan from motor power supply.
|
|
| |
Movie Clip Stepping System -- coming soon |
|
|
|
